KeySoft 7.2 Upgrade Instructions - 
BrailleNote PK. 
	
This document contains instructions on how to install the KeySoft 7.2 upgrade on 
your BrailleNote mPower PK (referred to as your PK throughout this document.) 
Separate 'Upgrade Instructions' are provided for each Notetaker model, that is, the 
mPower, PK and Classic. The instructions are different for each model, so you need 
to ensure that you are using the appropriate instructions for your model.

Use these Upgrade Instructions to upgrade your PK to KeySoft 7.2 via the internet. 

It is essential that you read all of the following instructions before starting the 
upgrade. You might like to transfer them to another computer, emboss, or print them 
for reference during the upgrade process.

Should something go wrong during or after the installation, troubleshooting 
information is provided at the end of this document.

What you will need for the Upgrade.


As well as your PK, you will need the following:  

1.	A CompactFlash (CF) card.  This must be at least 64 megabytes in size.

2.	A way of downloading the Keysoft 7.2 upgrade file and copying it onto the CF 
	card. You can download this file directly onto the CF card using your PK or 
	download it using a PC with an internet connection and a Compact Flash card 
	reader. One of the files is over 13 Megabytes in size, so if you are using a modem 
	then it will take about 40 minutes. If you have faster access, then it's preferable to 
	use it.

Warnings.


The following warnings are very important. Please read and follow.

HumanWare strongly recommends that you backup your Flash Disk before 
performing the upgrade.

Throughout the installation, your PK must remain connected via the AC adapter at all 
times.

Do not switch off, reset the unit, or remove the CompactFlash card at any time while 
the upgrade is in progress.

Once the installation commences, you must let it run to completion. Stopping the 
upgrade part way through may cause the PK to stop functioning and require you to 
send it back for service.

Downloading the Product Key.


Before installing the 7.2 upgrade, you need a Product Key. Download it from our 
website as follows: 

1.	On a PC or your PK, go to: 
	http://pulsedata.propagation.net/SDW/User/Login.aspx  

2.	In the first input field, type your PK's five digit serial number. This is in Braille on 
	the bottom of your PK and can also be accessed from within KeySoft. From the 
	Main Menu, press SPACE with dots 2-4 and press SPACE twice.

3.	The next field is a password field - type frog1. 

4.	Tab to the "logon" button and press ENTER. 

5.	On the page that appears, there is a group of radio buttons. The last one is called 
	KeySoft 7.2 key. Check this button and then select "download" which is located 
	below it.

6.	On the page that then appears, follow the link, "Click here to Download package." 
	A File Download window appears. Select "Save." 

We recommend that you save it to your PC's desktop, or if using your PK, to the 
root/top level directory (that is, not a subdirectory or folder) of the upgrade 
CompactFlash card. The file is called "KeySoft 7.2 Product Key (xxxx).exe" where 
xxxx is your serial number. Remember, this is not the upgrade itself, just the Product 
Key.

Installing the Product Key.


Now that you have the Product Key file, you can install it.

1.	If you haven't yet, copy the Product Key file to the root/top level directory of the 
	CompactFlash card that will be used for the upgrade.

2.	On your PK, go to the Utilities Menu, and select the Application Program option.

3.	At the Drive prompt, select Compact Flash and at the Directory name prompt, 
	select the root/top level directory. At the Program Name prompt, select the file 
	"KeySoft 7.2 Product Key (xxxxx).exe." At the prompt, "Command line?", press 
	ENTER.

4.	A welcome message will be announced and displayed.

5.	Press ENTER.
 
6.	After a brief pause, you will hear a completion message. Press ENTER again as 
	advised. You are returned to the Utilities menu. The Product Key is now installed 
	and you can go ahead and install the 7.2 upgrade software.

Downloading the KeySoft upgrade file.


You will now need to download two upgrade files (NK.nb0 and BrailleNote PK 
Upgrade.exe), and place them onto the CompactFlash card.

Please follow these instructions to download and copy the KeySoft 7.2 upgrade files 
to your CompactFlash card:

1.	On a PC or your PK, go to:  
	http://www.humanware.com/
	Click on Support in top navigation
	Click on BrailleNote in the left hand navigation, then Software
	Select the link called 'Download KeySoft 7.2 Upgrade'
	Select the link called "KeySoft 7.2 PK Download" to download NK.bin.


2.	Save the NK.nb0 file to a known location on your PC, or if you are using the PK, 
	download it directly onto the CompactFlash card. Ensure that the NK.nb0 file is 
	downloaded at the top level of the card and not in a folder. The KeySoft 7.2 image 
	file is large and if you are using a modem then this may take from 1  2 hours. 
	The file is around 13 Megabytes in size.

3.	If you have downloaded onto a PC you will then need to copy the NK.nb0 file 
	onto the previously prepared CompactFlash card. Ensure that this file is 
	downloaded at the top level of the card and not in a folder.

4.	From the same web page: 
	http://www.humanware.com/support/Braillenote/software/KeySoft7.2Upgrade.asp
	Select the link, "BrailleNote PK Upgrader."
	Download the file entitled "BrailleNote PK Upgrade.exe" and place it onto the 
	previously formatted CompactFlash card along with the KeySoft 7.2 upgrade. 
	Ensure that this file is downloaded at the top level of the card and not in a folder.

Installing the Upgrade.


1.	Ensure that your PK is switched on, the AC Adapter is connected, and the 
	CompactFlash card is inserted in the card slot at the back.

2.	From the Main Menu, press U to select "Utilities" and press ENTER.

3.	Select "Application Program" from the Utilities Menu.

4.	When prompted for the program to run, select the "Compact Flash" drive. At the 
	"Directory name?" prompt, select the root/top level directory by pressing dots 3-4, 
	followed by ENTER.

5.	When prompted for the program name, access the "List of programs" and choose 
	the file, "BrailleNote PK Upgrade.exe", by pressing SPACE repeatedly and 
	ENTER to select it.

6.	When prompted for "Command line?", press ENTER again. Follow the directions 
	and instructions until KeySoft prompts: "Install KeySoft 7.2? (It is 
	recommended that you backup your BrailleNote before installing)." 
	Press Y for Yes or N for No. If you press N, you will return to the Utilities Menu.
	If you press Y, KeySoft will prompt: "BrailleNote PK upgrade: please wait while installing. 
	To start the installation process, press ENTER."

	Note that up to this point, all prompts are in both speech and Braille.

7.	After you have pressed ENTER, your PK will display "Utilities Menu." The full 
	upgrade process should start, and you will hear beeps every 1  2 seconds for a 
	few minutes whilst the unit upgrades. During this time, your PK will continue to 
	display "Utilities Menu."

8.	KeySoft will announce and display: "BrailleNote PK upgrade: installation 
	complete. To continue, press reset." This will be followed by the display, "off" 
	and two beeps. Reset your PK by pressing and holding down the two control keys 
	known as C1 and C4 (consult the BrailleNote mPower PK User Guide if you need 
	further details about these keys), until two beeps are heard. 

9.	Release and hold down C1 and C4 again until two beeps are heard a second time. 
	KeySoft displays: "BrailleNotePK." The Braille display then clears, and a few 
	seconds later, KeySoft displays: "KeySoft CE version 7.2."
	The upgrade procedure is complete once KeySoft returns to the Main Menu.

Getting Started with KeySoft 7.2.


To find out what new functionality has been included in the KeySoft 7.2 release, read 
the 'What's New' section of your User Guide which can be accessed by following 
these steps:

1.	Go to the User Guide and select the Table of Contents.

2.	Go into the Table of Contents and press W for the 'What's New' section.

3.	To open the sub-index of the 'What's New' section, press ENTER.

4.	Information about the new functionality in KeySoft 7.2 has been divided into sub-
	sections within the 'What's New' section. To read the contents of a sub-section, 
	press SPACE repeatedly until you find a sub-section that you want to read, and 
	then press ENTER.

Troubleshooting.

If you have any problems with the installation, please contact your Distributor.  Please also
contact your Distributor if you have problems with your email, address book,or planner after upgrading.